1560 Vacuum Impregnating Tank Wood Fence Pole Treatment Machine

• Customization: Available
• After-sales Service: 1 Year
• Automatic Grade: Full-Automatic
• Model NO.: 1560
• Warranty: 1 Year
• Name: Vacuum Impregnating Tank
• Diameter: 1500mm
• Length: 6 Meters
• Positive Pressure: 1.7MPa
• Negative Pressure: 0.085 MPa
• Transport Package: Full Container Shipping
• Specification: DN1500-10500 Wood Vacuum Dip tank
• Trademark: Sawmill World
• Origin: Shandong Zouping
• Production Capacity: 18.55 Cubic Meters

Product Description

Product Description

Vacuum impregnation tank Fence Pole Treatment Equipment

Model	1560	1580	15105	1860	1880	18105
Inner Diameter MM	1500	1500	1500	1800	1800	1800
Tank Length MM	6000	8000	10500	6000	8000	10500
Volume CBM	10.5	14	18	15	20	26.5
Material	Q345R Pressure Vessel Plate,Thickness 12MM
Pressure	Positive:1.7 MPA,Negative:0.085 MPA
Vacuum System	Vacuum Pump+Vacuum Buffer Tank+Vacuum Pipeline
Compression System	High Pressure Pump+Pipeline+Liquid Inlet Pipeline
Return System	Return Pump+Return Pipeline
Control System	Electrical Integrated Control
Safety System	Manual and Electric Safety Interlock System+Safety Valve
Mix Tank	1.2 Meters Diameter and 1.8 Meters High,Stirring Motor and Stirring Claw
Injection Pump	Send the mixed material to the liquid medicine pool

1. Working principle of the equipment: The vacuum impregnation tank is to inject a certain proportion of liquid medicine into the product evenly and fully through a series of process operations such as vacuum and pressure, so as to improve the performance of the product.

2. The vacuum impregnation tank adopts the process of vacuum treatment and high pressure impregnation to realize the full entry of liquid medicine into the product. Pre-vacuum: after the product into the tank, pre-vacuum treatment is carried out to extract the excess water and air inside the product, so that the liquid medicine can be more fully immersed in the product; After opening the liquid inlet valve, certain liquid can be quickly pumped into the tank through the suction of the vacuum. Post-vacuum: After high pressure impregnation of liquid medicine, the equipment is vacuum-pumped again to extract the excess liquid medicine inside the product, which can achieve the effect of recovering liquid medicine and pre-drying products. During the impregnation process, a high pressure pump is used to feed and maintain pressure in the tank to maintain a certain pressure, so that the liquid medicine can enter the product more fully.

3. The technological process of vacuum impregnation tank is divided into the following steps Wood pretreatment... The wood goes into the can... Front vacuum... Infusion of liquid medicine... Replenishing fluid and pressure... Liquid recovery... After vacuum... Restore the pressure... Take out the product.

4, the use of electrical automatic control system. After process setting, automatic control of feed, pressure and time is realized. Automatic operation of air intake, liquid intake, pressure, pressure relief, liquid return and other processes. After the work is finished, it will close automatically, and the sound and light alarm will prompt and cut off the power supply.

5, the use of multiple interlocking safety system, can not open the tank door under pressure or improper operation, work is completed or improper operation and accompanied by a buzzer alarm, to ensure the safe use of equipment.

 

Detailed Photos

 

 

Company Profile